This review of Smok vaporizers nord rpm battery trinity price coils

I received a kit Morph smok nord2 kit the purposes of this review.

Smok morphing color:

– Gold black
– 7 colors and black
– Black red
– Blue and Black Prisma
– black and chrome prism

Description and features:

– Morph Mod 219 Size – 44.8mm x 30.2mm x 84.5mm
– Battery Type: 18650 dual battery (not included)
– Power range: 1 W-219W
– Display: touch screen 1.9 ”
– Input voltage: 6.4V-8.4V
– Output voltage: 0.5V-8.2V
– Cooking time: 0.001s
– Charging Current: 1.8A
– Charging voltage: 5V
– Resistance Range: 0.1-2.5ohm (VW) /0.05-2.0ohm (TC)
– Temperature: 200-600 ℉ / ℃ 100-315
Size tank TF -: 25.5 mm x 56 mm
– Capacity of tank: 6 ml
– Discussions Discussions: 510

In the frame:

– Morph smok mag 225w

– 6 ml Smok tank TF

– Smok TF BF-Mesh 0.25ohm tank coil (pre-installed)

– 0.25ohm Smok TF BF-Mesh tank coil

– silicone protective glass bulb

– glass tubes Replacedment

– USB Cable

– User’s Guide

– Bedrooms

 

Smok tank tf:

 

 

Tf is 56 ohm subtank mm high and is 25.5mm in diameter. In the package with the atomizer you will receive a glass tank and tank ordinary glass bubbles are very good, also receive a protective silicone in the glass tank and smok nfix coils. atomizer quality construction is good, the wire is smooth and everything is as it should be. Previous you can see atomizer “Smok” and the bottom of the atomizer can see the atomizer “Designed by Smok”, you can buy 5 different colors.

Atomizer equipped with a drip edge 510 pre-installed, so that the atomizer can be used other end 510 reduction if it did. Drop by drop-off points are pre installed very nice and I think it is convenient to use. I think it’s great that finally made the atomizer 510 is supported, but for some people would be better than the atomizer is compatible with 810 drip tips, however, advanced packaging drops are very comfortable and good looking.

This is a high-filling syringes. Before you can see the key press atomizer to install. When the top cover is pressed, you can view the contents of the hole. Comply with large holes and the atomizer can be filled without problems, so basically, filling here is very simple and can be filled atomizer very fast. More filling works well and should not leak when a sprinkler system is required.

glass syringes fitted with a bubble tank and pre-installed on the box will receive the usual glass tank. atomizer tank with a capacity of ordinary glass is a tank capacity of glass bubbles 2 ml and 6 ml capacity is very good and I think many people like reservoir capacity. With the atomizer receive a silicone protective glass for the tank to protect the tank in case you drop, very good in my opinion.

 

Using the spraying which receives two rollers and two coils of the same. Bf mesh coil is coil and its 0.25ohm resistance, it is recommended to power the coil is 30-80w 60-70w and better jobs. It can be very easy to change the coil atomizer, you have to do is press the atomizer coil is very easy and simple. When the coil is used first, it must be primed with a few drops and can be inserted into the atomizer and filled syringe.

Basically, you can see the ring control air flow and the ring can be seen two slots airflow. ring control air flow, which has some details that helps when you want to adjust the air flow, so you can more easily adjust more or airflow and allows you to leave out is the same side Oher.

How does it work? Atomizer and my mind:

 

build quality of the atomizer is very good, everything is as it should be. It comes with sophisticated drops 510 installed very good because it can use a spray tip 510 drops. Falling drop that comes pre-installed my opinion is comfortable to use. 810 atomzier be more compatible with drops of advice, so this could be a disadvantage for some people. The system is very easy to complete and can fill up fast, so far, works well. The capacity of the container is 2 ml glass standard, but with a very good bubble tank capacity glass capacity of 6 ml. In this package, we received a silicone protector for your tank that was really good. You really can easily replace the spool into the atomizer and the atomizer, you receive two coils.RPM80 pro battery works very well, taste and also a good steam, this is not the best mesh coils there, but certainly better taste than many I’ve tried sprays. Therefore, the tank is very tf solid deposit in ohms, worked well and it was quite easy to use.

 

weakness:

– Not compatible with 810 drip tips

Pro:

– The build quality is good
– easy to fill
– Compatible with drops 510 points
– comfortable points fall fall Preloaded
– 6 bubble tank capacity ml
– Protective silicone
– The good taste
– Two coils in the package
– Easy to replace the coil

modification:

Morph Smok is powered by two batteries 18,650 and this model works 1-219w. You can buy this model in 5 different colors.
44.8mm x 30.2mm dimensions of this model are x 84.5mm. mod good build quality, everything is as it should be. This mod design is very good in my opinion, they have received a blue mod and you can tell the beautiful paintings. This device is very convenient to use, no sharp edges and large shutter button, because it feels very nice in the hand. Faced with this mod you can see “Smok” and behind the mod, you can see the “Morph”. This model has a touch screen that I really like and also supports multiple operating modes that can be used mod.

From the top you can see the connection mod and here we have a spring loaded pin gold plated. Put here well and I had no problems with atomizers have been discussed here. Good connections, which rose slightly, which is good because you do not scratch the Ministry of Defense with atomizers. In this mod, you can use the aerosol up to 26 mm, which is more than was good for me.

Sub mod you can see the battery cover. I really like the battery cover locking mechanism. When the battery cover is opened, you can see how the mod mod painting batteries and is powered by two batteries 18650. So far I have not had a problem with the battery cover. When the battery is in the mod and mod stir when it was not a good rattle.

On one side of the mod, you can see the shutter button. Shutter button is huge and I really like the shutter button. shutter button is very convenient to use, is a dislocation and works very well. At the top you can see the shutter button and a button using this button, you can lock the screen or off screen. When the button is pressed lock screen and clicking a button you can turn off the screen.

 

In front of the mod, you can see the screen and a USB port.
You can use the USB port for software updates or to charge these devices are load balanced media, but as usual, I recommend filling your batteries in an external charger.
In this device, we have a very nice color screen, large, the size of the screen is a 1.9inch screen and in my opinion, this device looks very beautiful and really is a touch screen.

To activate it you have to click the shutter button 5 times and must do the same to turn it off. When the device is in the power mode event, you’ll see:

– I can not

– locking / unlocking

– Time puff

– W

– Preheat

– Left and right

– Resistance

– V

– against blow

– A

– The battery indicator

 

The touch screen works well and so far I have not had a problem with the screen. Also on the screen, you can see everything nice and screen brightness are very good.

In the enter the menu, you can see:

 

– Modus

– My style

smok trinity alpha price

– Setting

 

 

When the mode is selected, you can choose different modes:

 

– Watt

– temperature Ti

– Temperature Ni

– Temperature Ss

If you choose me mode, you can set up four different operating modes, and you can adjust your diet, you can pre-heat and add the liquid and the name of the NIC.
If you choose to puff puff, you can rearrange the tables.
When the setting is entered you can see:
– General (approximately factory reset, accessibility, food)
– Chip (Info)
– topics
– Access codes

 

If you choose a theme, you can choose a different background and you can choose different colors on the screen and can also set the screen timeout. If you choose an access code, you can set your own password, the device asks each time the battery is placed in a mod.
How do these devices work and my thoughts:

So Morph mod Smok very good in my opinion, and certainly one of the best mods out there, I especially like the blue. mod good quality construction and complain about this mod. Chateo also looks good, but I have to say that this magnet fingerprints mod will be a loss for someone. In the device it can be used for a diameter of 26 mm without good atomziers projection. You really can be easy to put the battery in the Ministry of Defense and the extent DIND’T have a problem with the battery cover. Rattle nothing when shaken battery and when morning. large shutter button and I really like the type of shutter button. It works well and dislocation. It’s also good to have a key to lock / unlock the screen and enable / disable screen. This model also supports load balancing, but as always recommended to charge your batteries in an external charger. Really beautiful screen and on the screen, we have all the information we need, big screen, the screen brightness is good and works well. I also like that we can change the color of the screen. This device has many options yet very easy to use. Mod works very well if you ask me, I tried with my MTL and atomizers me and runs smoothly DTL and will probably continue to use the device every day. If you are considering buying this mod and mod design you want, I can tell you all that this camera can be obtained safely.

 

deficiency:

– fingerprint magnet

 

Pro:

– Good build quality
– Good design
– Jack Good
– it can be used up to 26 mm diameter without false atomizers
– Binding slightly
– comfortable to use
– cozy fire button
– Screen Buttons
– a beautiful and big screen
– a good screen brightness
– Much of the information on the screen
– Easy to use
– The screen works well
– Theme Options
– balanced load
– the battery cover is working well
– My selection method
– Password Option
– No ring

 

sourcemore thanks

You can buy the kit here: smok vaporizers

 

IJOY Captain Mercury JUPITER Pod Shogun Diamond review

I received a pod IJOY Mercury AI system for the purposes of this review.

 

 

IJOY pod system is available in several colors:

 

– Red

– Black

– Blue

 

Specification:

 

– Size: 28 x 13 x 90.5mm

– liquid capacity E: 2ml

– Battery capacity: 450mAh

– Resistance: 1.6ohm

– Watt: 15W (max)

– Charging time: 45 minutes

– Ports load: Micro USB

 

features:

 

  • Chipset IWEPAL to ensure a stable output
  • Some protection for high performance
  • The indicator light for easy operation
  • Battery capacity 450mAh
  • 2ml capacity liquid
  • Can fill taste different e-juice

 

In the box:

 

– The AI ​​Module

– longe

– USB cable

– User’s Guide

 

IJOY JUPITER Pod ment system for use with a liquid of high e nicotine, nic molten salt. I pod system is a very small device, I can say that this is one of the smallest I’ve ever tried. The device is also very light, perfect for the pod system. You can buy this device in three different colors, I received a black and looks good in my opinion. The colors look very beautiful, has a matte finish and it feels great in the hand. As I said, it is very light, but it still looks like it has a very good quality and it is aluminum. In the package, you’ll receive a nice cord to wear the device around your neck if you like, so I belive that someone like this along, it was very nice to see that in the package.

 

Let’s start from the cartridge when you receive your device will look at the bottom piece of the tape cartridge to prevent this device to turn on and protection of the funnel, which is nice. Funnel well, it was comfortable and I can not say anything bad about the funnel, for me it was good. Cartridge is a lovely place and there was no magnet, but still very nice and there is no possibility that the cartridge may fall. In the slot device you can see two IJOY Shogun and make the cartridge in a very tight spot.

The bottom of the cartridge has no connection, there is also a place where the cartridge may be filled with an liquid and there is a hole for the air flow. So, the bottom is a rubber plug that you need to fill the cartridge. Holes Liquid e is great for the pod system and you will not have problems as possible, I use bottled gorilla and I have no problem with that. It is very easy to fill the cartridge you simply remove the rubber stopper with e liquid filling and replace the cap. 2ml capacity of the cartridge, which is good and most of the pod system has a capacity of 2 ml, if you use your nic saline should be in this device, it can easily last you all day because you can not be chain liquid high nic vape. The size of the air flow hole is 1.5 mm x 2.5 mm below. You can expect some condensation, but this is normal, you can not clean it once a day and you’ll be fine. In no coil cartridge with a 1.6ohm resistance.

This unit has a beautiful color and feels good in the hand, the device can see AI recorded and that’s basically all, this device is very clean. From the top of the device there is a slot where the cartridge is placed and you can see the connections of a gold plated spring here. From the bottom of the camera, you can see the USB port and you can see the two screws. In the device, you can be seen two drain holes to salt air, one on one side and the other hole on the other side, through the air hole is the hole in the cartridge and then to the coil.

On the device, you can also see the LEDs. No fire button activates AI pod automatically when Vape, whenever VAPE light will be green. When the cartridge is removed or when you put in the slot, a green light will be in devive, if there is a short circuit, the LED blinks three times.

This device has a built-in battery with 450 mAh capacity, capacity that is good for the pod system is very low. When the battery is empty the light flashes 10 times, and the camera turns off when the device in the charger, you will see a red light when the battery is fully charged, you will see a green light. Charging time for this unit is 45 minutes.

 

Use of the product:

 

First, I want to say once again that it is a very compact, suitable for stealth vaporizer, which is easy to use and can be handheld wherever you go, you can use the cable packing and take. The battery capacity is good in my opinion and I think a battery that will last all day with a middle course Vaper nic salt. The device of airflow is good, the flow of inlet air through the two holes in the device, and then turned to the coil through holes cartridge (hole size of 1, 5 mm x 2.5 mm). Not very attractive strict, but not loose, it’s something in between, you can have a decent mtl dl and can spray spray, but very, very tight, almost impossible, which is very good for MTL device. He hits the throat is very good, very good steam IJOY Diamond for the sheath system. Personally, I like MTL tight tie, but I can say that the air flow here should be good for most mtl vapers. I’ve only found two drawbacks for this camera, I want a more cartridge in the package and want to see the battery indicator. Basically, this unit works as it should, so I can not complain and would recommend.

 

Drawbacks:

– Only one cartridge in the package, there must be two

– The battery indicator will be fun

 

Pro:

 

– a small device

– It works well

– 450mAh battery

– Good build quality

– good color quality

– Traka

– It’s easy to fill the cartridge

 

You can buy it here: IJOY Captain

 

IJOY Captain Mercury Jupiter Shogun Diamond Bae review

Captain IJOY come in several different colors:

 

– Black

– H.H

– Rainbow

– Gun Metal

– blue

– Red

– Purple

– Green

– Gold

– White

 

Specification:

 

Saber 100 MOD

 

– Size: 97 (height) x 29 mm (diameter)

– Maximum power: 100W

– Output mode: VW

– Resistance Range: 0.05-3.0ohm

– Battery Type:

20,700 batteries (DC discharge = 40A, inclusive),

18650 battery adapter (continuous discharge current = 25A, not included)

Compatibility tank – No false by tank 25 mm

– Topic: About 510

 

Vape IJOY shogun

 

– Diameter: 25 mm

– Height: 56.5mm

– Capacity: 5.5 ml (with ordinary glass tube 4 ml) (standard) / 2 ml (Version TPD)

– Coil: DM-Mesh 0.15ohm coil (40-90W, pre-installed)

DM DM-Coil 0.15ohm (40-90W)

– 810 resin advanced drip Drip Tip

– Subject: 510

 

features:

 

Very compact, pen style laptop

CNC engraving with attractive colors

Compatible with single battery 20700/18650

100W maximum output with advanced chip IWEPAL

Custom button pentagonal fire

Bright and big screen

single user mode Custom

subohm beautiful tank with diamond design stylish

180 ° Quick Charge cap screw

The new DM-MESH mesh coil and coil diamond-DM DM

 

 

In the frame:

 

– IJOY SABER 100 (100W)

– IJOY 20700 battery

– 18650 Adapter

– DIAMOND TANK SUBOHM

– DM-Mesh 0.15ohm coil (40-90W pre-installed)

– coil-DM DM 0.15ohm (40-90W)

– Replacement Glass

– toolkit

– USB Cable

– Warranty card

 

IJOY Diamond Bae come in several different colors, I received it in color stainless steel. The diameter of the vessel sub-ohm diamond is 25 mm, the size of the deposit is 56.5mm. the build quality is good and is very similar to a smaller version of the tank, of course, it is bigger and a couple of different things.

You could see the sculptures in the atomizer, at the bottom you can see engraved “Designed by IJOY” and “Diamonds Tank” on the upper deck, you can see engraved “IJOY” and diamond engravings. Below the previous limit, you can see some details and the details of the same diamond ring is adjusting air flow ..

 

diamond deposit sub-ohm equipped with a tip of very good drops, two end rings and O drops drops very end in place. You can not use here 510 or 810 drip tips. You can unscrew the tip of the thread of the base. I love this decline, which was more comfortable than the end of the dripping of a baby version of this tank. This fall of the tip of 16 mm in diameter, the diameter of the end portion 10 drops mm.

 

This is a superior spray filling and you can remove the top cover is very easy, you only need half a turn and that is, you can fill the tank without problems, two details engraved on the top cover helps a lot when you want to open the top cover. A hat letting go, you can see a huge hole for liquid mail, so probably will not be a problem, even with a large bottle. In my opinion very nice filling more.

 

This comes with the spray tank glass bubble, bubble glass tank with a capacity of 5.5 ml, which is very good. colored glass bubbles, you can see the image as it looks. Also in the package, will receive another glass tank, tank capacity ordinary glass and ordinary glass tank is liquid 4ml mail, which remains a large capacity. I use a bubble of glass tank, because it looks better for me and the tank has a greater capacity. Also, if you like, you can buy a diamond tank with a tank capacity of 2 ml.

 

 

This deposit will receive two rolls, the two coils are coils mesh. It winding the pre-installed is DM – mesh coil, the coil resistance is 0.15ohm, has been recommended for the coil power is 40-90w. replacement spool receives the coil DM DM package, the coil resistance is 0.15ohm, it is recommended to coil power is 40-90w. Before filling the tank, it must be primed coil with few drops of liquid and, because this way Pod IJOY jupiter will be avoided when winding starts, can fill the tank and can be used without pull away.

To spray, you can buy a head RBA to install their own coils, this is a great advantage because if like a tank, you can save money by RBA head coil.

 

atomizer is compatible with several rolls:

 

– X3 – C1, the coil resistance is 0.4ohm, force is suggested 60-90w

– X3 – C3, six coil, the coil resistance is 0.2ohm, force is suggested 90-110w

– X3 – C2, the coil resistance is 0.3ohm, force is suggested 60-100w

– X3 – C1S, wood pulp and cotton, this 0.35ohm coil resistance, the force is suggested 40-80w

– X3 – Mesh, wood pulp and cotton, this 0.15ohm coil resistance, the force is suggested 40-90w

– X3 – RBA

– DM – C2M, the coil resistance is 0.3ohm, force is suggested 60-100w

– DM – C1M, this 0.35ohm coil resistance, the force is suggested 40-80w

– DM – DM, this 0.15ohm coil resistance, the force is suggested 40-90w

– DM – Mesh, this 0.15ohm coil resistance, the force is suggested 40-90w

 

 

Thread a very good base, you can almost change coils easily. The bottom of the tank, you can see 510-pin gold plated wire is also good here.

In the base there is flow control ring and two air holes for ventilation. You can easily adjust the air flow, what do you settle on the one hand, it will be the same on the other side.

The air flow is different between this version and the version of the atomizer baby, tank diamonds more air the baby diamond, also controls the ring airflow here is somewhat more flexible, but still works well.

How does it work? Atomizer:

 

Is very simple tank sub-ohm, can easily fill, has a very big hole, so you’ll have no problems with filling and can be changed easily and quickly your reel.

You can not use your advice here 810 and 510 drip if this can be a trap for someone, but I think it’s very convenient to use and is not a problem for me. Coils works well, no blows dry and liquid, use 70-30 pg vg e-liquid in the tank and everything is almost as good. the excellent vapor production. Good taste, I prefer the DM mesh coil, I think it works best for taste and want to use it, the coil Dm-dm is also good, but my first thought was slightly better.

RBA head is also very big advantage because you can save a lot of money.

This is a very strong sub-ohm tank with good quality construction.

 

 

 

My saber mod joy

 

Pod IJOY mercury is arranged tubes. the maximum output power is 100W. Looks good in my opinion, this model is 29 mm in diameter at the bottom, but above diameter is 27.5 mm mod, but once again the connection 25 mm inner diameter, so you can used here atomizers to 25 mm in diameter, suspended. Mod is the height of 97 mm, so it is not very big mod I like it here. IJOY sword is powered by a single battery, supports two types of batteries that can be used batteries 20700 here and you can use 18650 in total, you will receive a 18650 large adapter pro is here in the package, you receive a battery 20700, you can use the sword when you take if you do not have a battery. It’s great that the battery in the package. the build quality is very good, had no waste when shaken mod unless the shutter button, you can hear the shutter button a bit, but everything else was fine. We can see some details about the mod, a mod that you can see engraved “IJOY” superior mod you can see engraved “Mei vaporizer force be with you” beneath the battery cover, you can see engraved “designed by IJOY”. IJOY sword has a connection pin stainless steel and gold plated spring 510.

In the MoD, you can see the USB port to charge and update the firmware, you can charge the battery in a mod, but I recommend using an external charger.

At the side of the mod, you can see the shutter button has a diamond shape, which looks quite nice, dislocation, but have little to play a little when shaken the morning. protruding shutter button and can be easily found when the mod is taken and want to vape. shutter button works very well each time, until now there is no fire loss at all. plus and minus buttons are also good, the buttons are dislocation, even more than the shutter button and when the mod is stirred plus and minus buttons are kept.

Just below the plus and minus key on the screen, the screen brightness is very good and you can see everything on the screen.

In a good course of the son of the battery and you can easily change the battery. Also in the hat, you can see the detail that helps when you want to open the lid of the mod. The battery cover is a vent. At the unscrew the battery cover, you can see recorded how you have to put the battery, but also in the mod that can be seen are marked with red how to replace the battery, mod also has reverse battery protection if you make a Error. Pin on the battery cover is spring loaded.

It is very easy to use this mod, this mod is very simple. To activate the mod must click 5 times on the fire button to turn off the Ministry of Defense must click five times on the shutter button. At the click 5 times to activate it, you will see on the screen “Saber” and the version of the firmware. At the turn the model on the screen you can see:

 

– Power

– The battery indicator

– against blow

– coil resistance

 

 

 

This model can only work in fashion VW and for someone who would be a scam, but for someone who would be a professional is great because sable IJOY has features that can interfere with a person or complicated someone basically how it all very easy and simple.

In this mod you can reset the counter and breathing do so, you must click 3 times on the shutter button and you will be asked to reset the counter breathing.

You may adjust the power of 5W – 100W and when pressed more 0.1W power button gradual adjustment, but if held down the button will amount to 1 mg and gradually grow faster.

 

Some of protection:

– Short-circuit protection

– Low Power Protection

– Anti-return battery

 

 

 

So iJoy saber is in my opinion a very beautiful model of the tube, which is very subjective, but I like the way it looks and the size of it, because this mod is not much that so it is very comfortable to use. Recently, we can see a lot of tubes mods and I really like, because it can be very useful mods tubes.

This button works very solid, sensitive and rapid fire, I used to use it 50watts. It is very good that the package is a 20700 battery so if you do not have a 20700 battery, which can be used. IJOY about 20700 batteries, which have several of these batteries, 21,700 and 20,700 IJOY I, some batteries, which must be longer and the battery still works well. It is encouraging that in the package there is also an adapter for the 18650 and if you wish, you can use the battery 18650 Personally, I like that also can be used by 21,700, but no matter because you can always use the battery 20700. We designed a bit here in my opinion and hope IJOY right with the next update, I think when the battery indicator two bars whenever the screen is off and vaporizer want while pressing the shutter button on will display “Saber” and version firmware, and after a second, you can vape, but believe it will be fixed with an update.

Build quiality as I said, very good, once again I have to mention the great benefits of the battery pack, this mod is also very convenient to use and if you like configuration mods tube play as well.

 

 

You can buy it here: IJOY

A review about the VOOPOO co-branded model

First on the carton packaging usuall come in a sturdy plastic case with Voopoo Drag Mini logo on top and covered with a removable foam padding useful if you want to use for other things. VOOPOO PnP-VM1 Replacement

The case is wrapped in a cardboard box with a picture and the name of the team on the front, while the back is a list of content usuall, colors, mod, original security code, etc.
In this case, there is a change, tank, two coils, user manual, and a USB cable.

The first thing we noticed when you take this case mod is how light it is. (Internet is 140 grams)
and the battery cover any safety hinges, with + – of the battery in the direction of the contact.
Skin? Wieght finish combined with light makeup feels comfortable in your hand. comfort metal alloy parts are matt black with black paint splashing effect that resembles a smooth and shiny surface droplets when a light fixture, and therefore tried to clean. In the mod hidden side under the rubber stopper (to keep the pockets of fiber in your pocket and your mod) Port Type C to update the firmware, although the manual says it can be used for charging with USB cable included II always I recommend charging the correct use of external battery charging.
mod inner screen reminds me of a sports car, the pilots believed the child the name brand unification “ARGUS”.
When the mod participates for the first time in fashion and modify to customize smart as a PNP Wich coil used and watts maximum limits for coils 3 strokes clicks of movement for the RBA in which you can adjust the power of full 160W recommended three clicks mode wich temperature control support roller nickel, titanium and stainless steel. + Firefighters and lock all buttons including the shutter button, and firefighters and – button will clear the table and gasps. Press three buttons simultaneously display the chip ID and the code level?

VOOPOO NAVI is in two parts. The top is made of PCTG is the same module that uses Drag s / x and compatible with the coils PNP Voopoo are available in different strengths. Rapid filling and easily by lifting the rubber stopper at the bottom of the car and fixed at the bottom with three strong magnets. The bottom is made of stainless steel 24 mm in diameter at the base and has two slots for controlling adjustably airflow knurling very adherent on the ring Airlow control and the spindle 510 so that can be used Drag in a container or mod s / X.

I use a 45W 0.2ohm coil supplied with Airlow opened completely and get a good taste and production cloud. Knowing the subject coil PNP to promote Sali and have a small advantage when used, after standing for about 12 hours ago benefit if it was a very hot day (30 c) and I eLiquid because hot water can be lucky advantage Wich.

Specification:
Argus GT Mod:
Dimensions: 132 mm x 51 mm x 26 mm (Mod only 51 mm x 86 mm x 26 mm)
Material: Leather + zinc alloy
Output Power: 5-160W
output voltage: 6.4-8.4V
Resistance range: 0.1-3.0Ω
18650 requires double (not included)
VooPoo tank PnP:
E-liquid capacity of 4.5 ml (2 ml Version TPD)
Material: Stainless steel + PCTG
Resistance: 0.2 Ohm (PnP-VM5) 0.15 Ohm (PnP-VM6)

content:
1 x VooPoo Argus GT Devices
1 x VooPoo PnP Tank – 4.5 ml (2 ml Version TPD)
1 x PnP-VM5 – 0.2 Ohm (40-60W)
1 x PnP-VM6 – 0.15 Ohm (60-80w)
Cable Type 1 x C
1 x Case
User Manual 1 x Warranty and

competition and send VOOPOO PnP 20 / 22.

 

 

Well, this is my last exam powerful and some animals VooPoo.

Thank you very much to the people of @VOOPOO to let me try a big team in recent years.

Here VOOPOO Drag 2 Platinum.

You obtain.
Do it in a plastic box in the Mini was a good idea.
get your

Double Argus cell (18650 not included) mod 160W.
Barriers x sheath.
Barriers 510 x converter housing tank.
PNP PNP 0.15ohm of 0.2ohm coil and the coil.
Cost USB Type C / lead firmware.
information manually wound instructions, gene chip card and security.
The first is compact enough to duplicate sets mod 18650. Many 26mms and 51 mm x 132 mm (including the adapter box). Very light too.

finished in the same line as the recent x excellent tensile strength, remember to get freezer have long lost things habits with a mixture of alloys, leather (more or less) and carbon.
Not bad for everyone, and it is certainly a step in the right direction.

The front panel has a relatively simple manner. beautiful color screen, large fire button at the top to vibrate only and strict standards and Lowing button on the screen.
USB connected and the surprising side has a rubber cover. Allows easy loading (if that is how they fill, tut tut … .. Lol) overprotection and edified TBH I think we have the 2Amp load for all devices based on the recent gene chip.

160W output, I like it because it is realistic. They are not able to write to the pressure of 200W capacitor coupled to the side.The
Battery conveniently stored on the basis of the spring, the locking lever.
The menu is very similar to a box base x Argus. Watt is automatically limited to the maximum security for the operation of the power coil that is an excellent point and I’m glad to see this trend continue.

New gene chip TT has all these characteristics (see review takes X for details), and the ability tc full (I do plus and minus buttons to go to TC). RBA RDTA sheath or coil will be perfect for deposits tc action with an event or anything.
This has a standard connector cover 510 is a masterstroke.

You can use a deposit pod adapter or select the slide 510 x sheath included.

sheath is 4.5mls is 2 ml simple English. PNP coil is always very good for taste, but has not had this problem before filtering the insulation on the base. This has significantly increased recently 0.15coil and some monkeys have told me things are improving in others. 510 adapter really helps here (again, the transparent sheath through which a strong magnet) because it does not allow the inclusion of juice MOD easy.

Other Voopo winners. If you like the unit x (i), you’ll love to do the same thing forever.

Smok Trinity Alpha Kit Review — Anything Different From Lost Vape Orion

This seems to Smok accelerate the release of new products recently. Today we are here to examine the pod system Smok new kit – Smok Trinity Alpha kit. Before we begin, I ask that anyone here bought Orion Q vape missing or DNA pod kit yet? I’m sure you know a little more about the Lost vape Orion series. Well, you might find a reflection of the Orion kit at Trinity Alpha.

 

setting:

Dimensions: 91 x 16 mm 38X

Capacity: 2 ml / 2.8 ml

Coil: coil 0.6ohm North Mesh / Mesh-MTL North coil 0.8ohm

Power: 10-25W (SOFT / NORMAL / HARD MODE)

Battery Type: Built-in 1000mAh

Input voltage: 3.3V-4.2V

Output voltage: 2.4V-6V

Load current: 10.7A

Load voltage DC 5V 1A

Resistance Range: 0.4-1.4ohm

Package Contents:

Smok Trinity Alpha Battery

Smok Trinity Alpha Pod vacuum (2.8 ml)

North Mesh 0.6ohm coil

North-MTL 0.8ohm coil Mesh

1 x USB cable

1 x Manual

battery design

 

As I said above, you will find some reflections on the Trinity vape Lost Alpha Orion series on this kit. Maybe some people like to know what kind of “what is happening with this kit” when you see this image. LOL.

The battery is fully made of zinc alloy material with a surface process carefully polished. So you can find this kit so glittery and shiny under the light. rainbow colors always traditional kit colors pod. On each side of the battery design so as to provide a smooth shape resin touch feeling. But I’m a bit of a fear so easy to leave fingerprints on the surface and intermediate metal frame. The truth is that just what I was afraid. On the other hand, the appearance of colorful and shiny and clear enough sweet. Now keep in mind that this does not leave a scratch on this kit.

large fire buttons offer more convenience in cooperation. Compare with Orion Missing vape, no power mode function on this trinity alpha kit with a single button press to set. The hard mode / Normal / You can choose to use soft. And the appropriate power is 10W-25W.

Meanwhile, there is a security protection to the position of platforms – lock button on the pod cartridge. Unlike the magnetic connection design on the most pod kit, but it is the same as the Lost vape Orion series. Provide special locking button vaping safer if you have a baby that is still being played around you when you vaping. Personally, I would name the baby proof locks.

 

design Pod

 

Pod cartridge also comes with a special design in a way. filling filling pull-then-hole brand becomes easier. Compare with the design of the screw Lost vape Orion port, pull light switch and charging on alpha trinity simpler and more efficient. And you can also see the air hole in the charging port next pods.

Smok coil design inherited from the north, which means Trinity alpha pod compatible with North Smok rollers. Northern North mesh nets MTL 0.6ohm and 0.8ohm coil bobbin included in the package for a range of vaping experience and needs.

With the great success that the kit Smok has been done, there will be more of the same pod Smok coil design kit in the future. Well, you can see this coil design in a box kits – Morph kit 219. Check this kit here, you may find of interest.

Compare with Orion Missing vape?

Honestly, breakthrough and innovation is what we want to see in the market vaping. Of course, we need a mature technology in the kit vaping instead of semi-finished products. Orion lack vape, vape all love the happiest to see a single pod design of this kit. For now, Smok try to learn and reproduce the type of pod set. Meanwhile, they also make their own adjustments and changed to a single pod kit becomes easier to use. People can not understand why Smok take the path of reproduction because they really have the ability to create and innovate. I also do not know. But we, the fans and users vape, where there is a change, we salute and support.

Decision

Set aside in the same general design, trinity Smok alpha pod kit kit is undoubtedly brilliant. Make sure the coil design special representative and the excellent performance in this kit. By the way, do not forget the integrated 1000mAh battery. Because you can spend more than a day vaping. Honestly, I hope will be adopted design of traction and fill in more humane and more pod kit. Trust me, you want to try again after the silicon port connector you use the trinity of Alpha kit Smok.

Of course, I would recommend this person Smok Trinity Alpha kit.

Here: Smok Trinity Alpha Starter Kit 1000mAh

 

Thanks for reading!

Augvape Intake Sub-Ohm Tank

Hello,

 

Today I Augvape intake tank for inspection, a collaboration between MikeVapes and Augvape. MikeVapes is my favorite so critical on YouTube so my expectations are high on this one.

Many may know RTA admission, earlier taking the series. The particularity of this tank is Clapton mesh metal tape used in the coil, Augvape claim GDR like aroma. We’ll see!

 

In the box:

 

– tank intake Narada Pro Pod System VW Starter Kit

– 1 * Glass Bubble

– 1 * 0.15 ohm regular coil Mesh

– 2 * Mesh Coil Clapton

– 2 * O-rings

– 1 * User Manual

– 1 * Warranty Card

ILike that you get three coils in the kit, do not remember everything I owned tanker which has three coils in the kit. Coils, but not packed or sealed and have a visible fingerprints on them, Augvape hope that the kit will improve the future.

 

Review:

 

This beautiful container with zero brand outside of the tank, right at the bottom. I like simple search tank and that’s what it is. Carved into the “A” over the entire tank provides the right grip for each part. Overall this machine is well done and if the quality of feeling, this tank was the strongest of all the tanks SubOhm I submitted so far, and I have great hands.

Even if the tank is much better with the right lens; the glass bubble simply has a greater capacity (3.5 vs 5 ml) which is essential to such a reservoir. 5ml is a kind of standard

It is easy to disassemble the entire reservoir for the replacement reel and cleaning purposes. As the rings is also coming from the air flow. One thing that I struggle a bit with the tap of the coil with empty hands, too bad they do not include the removal tool coil to make it a little easier. The coils are mounted easily.

 

Top fills easily with a key locking mechanism 90 of its degree, as I love the SubOhm tank. Top hat shape provides good grip to be easily opened. This does not Recessed seat because of the inserted rubber stoppers in the filling hole, which provides good sealing.

 

The air flow allows a lot of air, and for a beautiful limited edition. I must say that the noise of the air flow is very smooth and quiet enough for this type of tank. ring airflow moving with ease and because the peak engraved on the “A” very easy to get a good grip.

 

There is only one point drop in the kit, but it is a straight point net is. In minimum cap position due was not too short.

 

Let us now talk performance. I started with a wire mesh Clapton, just because it is marketed as an innovative taste and upscale. Admittedly, the taste is amazing on this coil, and what I like even more is the fact that it is probably a little warmer than usual coil Mesh, perhaps because of the design Clapton. The sense level GDR? I would say yes, at least very close. The difference with the GDR, however, is that you do not need to buy a Rolls-drop and if the performance you just fall leaves replace cotton. But for those looking for a taste of SubOhm tank with falling rolls is a good choice.

 

Another coil Mesh does what you expect of a mesh coil, it gives a good flavor and a dense cloud. If I had to choose between the two coils, it will certainly be a Clapton wire mesh, the only truly revolutionary in my opinion. In the Netherlands, we would say “A blow to the Bullseye” and I think the mesh technology is suitable Clapton by many companies soon, it was good.

The two coils have no problem with the chain vaping all, very saturated axis continues nonstop. I’ll have some accumulation of condensation through the high-speed air, overtime, it becomes a little under the ring moisty airflow.

 

Conclusion:

 

Looking for a drop tank SubOhm coil which provides a fantastic flavor? Then this may be your best option right now. The wire mesh is really great Clapton. I highly recommend this SubOhm tank, but keep in mind it is my opinion

 

If there was a downside to mention that it would be difficult to take coils with bare hands, and the fact that the coils do not come sealed and a little dirty.

One good thing about this tank is the price, you can get them from various sites for under $ 20 and you get three coils inside the box!

 

Thank you for reading, take care!

Sjoerd

Voopoo Drag 2 Mini coil And Spray

Monodosis Voopoo art systems in millions of colors, seven colors available for your choice: paint, dark blue, ink, red mesh, silk blue, purple and carbon fiber. Voopoo Vape Kit is powered by 1500mAh Kit – integrated battery and maximum results can not be less than 40W.

Inhaling air flow products, controlled breathing and independent pneumatic and respiratory assistance user configurable: Voopoo Drag 157W has three innovative airflow me! Rechargeable hand coverage – 3.8 ml size of the core capabilities of your vaping experience. In addition, this package comes with software Slide NAVI kit box Voopoo Drag 2 Mini coil and spray the coils of smoke PnP MV4 series. Secondly, it will bring the best experience of the delicate flavor and thick clouds.

Scroll Voopoo Starter Kit What’more NAVI overcome this sensitivity is unprecedented and the force of the blast, with independent innovation air ducts, air inlet mode NAVI enough to bring a lot of makeup air and subvert special knowledge. And perhaps without slipping Voopoo Drag X VW, intelligent reading coils have cake and other functions. For additional security, the protection of seven to support: Ex – protection against overload circuits, maximum power protection – diacharge protection and protection against overvoltage – temperature protection. In short, a fantastic and very nice, just be happy and enjoy vaping all day.

NAVI MOD POD

Voopoo Drag X Mod Kit Capacity

Voopoo Drag X Revenger a new chip with integrated 1500mAh battery to support the automatic and manual modes to meet your different needs. It also comes with a practical capacity and juice 3.8 ml / 2 ml (HAP) in the mouth of fine droplets. Moreover, the adoption of innovation Voopoo Drag X VW with three patented pneumatic air to breathe independently. In addition to the functions that support all threads coil bobbin platinum coil cloud Voopoo Voopoo obtain a good taste and rich.

Voopoo Drag X Pod is the ultra portable speaker system with the power of traditional mod box. FETCH MINI kit is equipped with a battery connection and dust resistant oil 1200mAh POD design compatible with the RPM and north details families.Featuring coil elegant glass, body color, the internal battery of 1200mAh Voopoo Drag X Mod Kit capacity 40W and 5W. Slide Voopoo specification data for vaping and hit the shutter button and two buttons feel perfectly compact and ergonomic. Voopoo Drag 2 is available in two configurations and the magnetic characteristics of the connection.

Voopoo Navi

Voopoo Drag X Pod Is An Ultra-portable

VOOPOO Drag X VW Pod Mod Kit 80W

The Voopoo Drag X Mod Kit is a portable mini ultra-innovative devices that take advantage of the nacelle and mod box and combine them into a single unit. Powered by the new gene chip has an integrated vaping for your needs 1500mAh battery and supports manual and automatic loading. In manual mode, you can adjust the output power sprayer kit button Voopoo Pod System. innovative blow to monitor and record their usual two weeks vaping. color TFT screen of 0.96 inches lets you see all the statistics, such as Vape batteries, shock and fashion / watt, etc.

Voopoo Drag X Pod is an ultra-portable kit mod pod that combines the advantages of the device and mods pod housing. As cuboid and covered with bright features and equipment. It is small, but equipped Voopoo Drag Price the integrated starter kit battery for vaping. 1 – output range of 40 W, X Voopoo performance Vinci adjusted to match the style vaping.

Voopoo Drag X Mod Kit sliding doors

What is the first to say that if the burning desire to vape. It happens to everyone and easy to fix. A fire shaft Kit Voopoo vape dried and cured when heated. Voopoo Vinci Coils a part of the evaporator tank eLiquid. eliquid axis remains before it is converted to steam when the coil is heated. If the tree is not completely saturated with eLiquid when you take a deep breath, this material can burn a bad taste in the mouth and prices leave.

All batteries, but ultimately different vapers, occurring at different speeds. Multiple users can edit their package weight every week, while others need to replace coils once a month. This varies from one device to another, but we hope that the future role of the freezer for about two to three weeks. After the coil burned, there is not much you can get an idea unless changes do coils free. But there are some things that extend its life. Four learn all the features, but many new vapers would burn the Voopoo Pod System because they do not know how to protect them. In this case, this guide will new vapers to solve compared to less sophisticated equipment. But he did teach vapers not know one or two things at once. Learning how to save you money on the roles and the best flavors of each stroke of the evaporator.

If you only put in a new role and getting a burning sensation that can be caused to evaporate by a chain when a hit with the train between the rest just taken. This is probably the most common cause burns in the coil, especially for new vapers. Most Vapers evaporator at some point connected. Even experienced vapers box with the ignition key when the slide in small tanks Voopoo Drag X Mod Kit sliding doors are very useful. Chain vaping waves, the coil is not damaged enough time to absorb more eLiquid between trains. This leads to dry and burning wick.

Stop chaining burn volatile voice. can rest only 15 or 20 seconds between each stroke. In practice, however, it is often more difficult than that. Most Vapers, especially new vapers, were former smokers and have the habit of taking many small strokes as they would with a cigarette. Many vapers vaping nicotine addiction and can help meet these chains want. If the chain nicotine addiction steam to satisfy, try greater resistance to nicotine Voopoo Drag 2 Platinum. You can go to the evaporator juice, as they are a satisfactory long neck many former smokers can provide with a high DP. You can also go slower and evaporator to hit to avoid in your pocket accept temptation.

If the chain vaping will not be Voopoo evaporator are drawn. It takes a little superior discharged with the Blitz, but it is not necessary to wait until the juices seep into the pen. Recommended Products mature and not for new users. You can buy two different devices and rings.

Why does my vape taste burnt?