The Caliburn Koko is the follow-up to Uwell’s original Caliburn and it looks absolutely nothing like its predecessor. The Caliburn Koko is a small, square-shaped pod gadget with a 520mAh built-in battery and an 11W maximum output (like the initial Caliburn). The Koko is draw activated and utilizes refillable pods with a 1.4 ohm coil resistance.
Uwell has actually been progressively releasing fantastic kits and tanks like the Nunchaku 2 vape pen, Valyrian 2 tank and Amulet vape watch.
Could the Koko better than the Caliburn and is it worth your cash? Keep reading to learn.
Uwell Caliburn Box Contents
1 x Uwell Caliburn Koko Device
2 x 1.2 ohm Caliburn Koko Pods
1 x Micro USB Cable
1 x User Handbook
1 x Chain Lanyard
Aluminum Alloy Building And Construction
Measurements: 67mm x 43mm x 12mm (Consisting Of Pod).
2.0 ml Refillable Pods.
11W Maximum Wattage.
Compatible with Caliburn Pods.
The Caliburn Koko uses Uwells BEIN chipset and it features new 1.2 ohm pods that work with the initial Caliburn. The Koko can utilize original 1.4 ohm Caliburn pods.
The Koko has a 520mAh battery and an 11W optimum wattage output– the like the Caliburn. It’s a draw triggered device so there are no buttons; simply inhale on the mouthpiece to vape.
The draw from the Koko is the same as the Caliburn. It’s a nice, loose MTL draw. If you liked the draw from the Caliburn then you’ll like the Koko.
The Caliburn Koko is little, square shaped and truly light. Including the pod, the Koko is 67mm high, 43mm wide and 12mm thick.
Construct quality is exceptional and there’s nothing that sticks out as badly done. The machining is clean and the pod fits neatly into location. The Koko logo on the front and back of the gadget are glossy and pick up fingerprints though.
A chain lanyard can be found in the box and because of how light this device is, I have actually been wearing the Koko around my neck like some sort of fashion accessory. It’s simply too simple to lose and the lanyard assists to keep it close.
The Koko includes new 1.2 ohm pods and there are two of them in package. These are red at the base to separate them from the original Caliburn pods which are black at the base. You’ll be pleased to know that they’ll work in the Koko if you still have Caliburn pods. The Koko pods will likewise work in the Caliburn.
The top cap on the pod manages and this admits to the fill port. It’s a discomfort to remove sometimes but it’s certainly secure.
Once the leading cap is off you’ll see three holes, however the middle hole isn’t for filling. Just fill through the holes on either the ideal or left side. I ‘d recommend a pointy-tip bottle for filling, droppers can be hard to utilize without making a mess.
The pod attaches magnetically to the Koko but you still have to click it into place. When the pod is seated there’s no wiggling and it’s very secure. There’s a convenient e-juice viewing window on the side of the pod so that you can see your ejuice level without having to get rid of the pod.
The Caliburn Koko has the very same airflow as the Caliburn: a loose (but not airy) MTL draw. It’s simply tight adequate to please me however it isn’t so tight that I need to have a hard time to get a draw.
For those of you who are looking for a tight mouth to lung gadget, the Koko isn’t what you’re searching for. But if you like a MTL draw that is someplace on the looser side without being too loose, this is your gadget!
The Caliburn Koko has the exact same 520mAh battery as the Caliburn which, to be sincere, is a little frustrating. Battery life is still decent however even an upgrade to 600mAh would have been nice.
As it stands, I’m getting a pod and a half out of a complete charge. That’s a day and a half of use. Okay but there are vape pod systems out there with much larger batteries and much longer usage times.
There’s an LED on the Caliburn Koko that lights up in three colors: green, red and blue. Green is full battery, blue is medium and red is low. When the Koko is out of the juice the LED will blink red.
Because of the a little lower resistance, the Koko’s 1.2 ohm coils provide a warmer vape than the 1.4 ohm coils for the Caliburn. I choose a warmer vape so this temperature is right up my street.
The pods don’t take long to break in at all. After the very first couple of puffs I can currently taste the flavor popping through. Utilizing a 35mg nicotine salt the draw is ideal. I get smooth vapor and the throat hit is on-point too.
The experience is so similar to the Caliburn that it’s tough to separate the two. The greatest distinction is the warmth of the vapor however otherwise whatever else is the same. The flavor is just as good and the draw is just as smooth.
One significant professional to the Koko is that I’ve had no performance issues at all. The draw triggered firing works flawlessly and consistently. The pods have not dripped either and my battery connection has remained dry as a bone.
The Caliburn Koko isn’t much different from the Caliburn. The new pods deliver a warmer draw but if you currently have the Caliburn and a warmer draw is what you’re looking for, you can just purchase them independently.
If you already have the Caliburn, the Koko isn’t much different and I wouldn’t recommend choosing it up. But if you do not, the Koko is a great pod device that delivers warm vapor and a loose MTL draw with a good throat hit.
The Caliburn Koko is the follow-up to Uwell’s initial Caliburn and it looks nothing like its predecessor. The Caliburn Koko is a small, square-shaped pod gadget with a 520mAh built-in battery and an 11W maximum output (same as the original Caliburn). If you liked the draw from the Caliburn then you’ll like the Koko.
If you still have Caliburn pods, you’ll be delighted to understand that they’ll work in the Koko. The Koko pods will also work in the Caliburn.
Geekvape Baron BF RDA Review
New Asmodus Minikin V2 under test-powerful features and touch screen