relx device vape herbva pro nokiva artisan vaper comment

I received a gift from heaven artisan vaper for purposes of this review

– the black carbon fiber
– Dark Skin
– Brown skin
– white Empire


– Size: 105 x 23 x 13 mm
– Material: zinc / PCTG
– Battery capacity: 700mAh
– Power: 20W Max
– Juice Capacity: 2 ml
– Voltage: 3.2V-4.2V
– Coil: 1.0ohm / 1.4ohm
– Load current: 1A

In the box:

– Arteries PAL Kit (1.0ohm with cartridge)
– PAL cartridge blood SE (1.4ohm)
– longe
– Type C USB Cable
– rubber ring
– Manual
– Warranty Card

herbva nokiva it is a small device.

The dimensions of this device are 105 x 23 x 13 mm. You can buy it in 4 colors and different arteries pal SE device mtl. I must say I really like the design of this device looks great in my opinion. On the device, you can see two sculptures is “PAL” and the device can see engraved “AIRISTECH”. In the package, you will receive two cartridges were very good and also in the package, get a cable that many people would like. construction quality of this camera is very good, which is made of an alloy of zinc and PCTG. This device is very convenient to use, it is always nice in the hand.

Therefore, with this device, you will receive two cartridges and each cartridge has a different coil. The I pre-installed cartridges with a coil resistance and 1ohm cartridges in the package comprises a coil with a 1.4ohm resistor. At the top of the cartridge, you can see the funnel and very convenient to use in my opinion. To fill a cartridge having to remove the tip and mouth when you remove it, you can see two holes to fill. large filling opening and can fill the cartridge with the bottle gorilla without any problems. From below you can see the magnet cartridge and you can see the flow of air hole. the cartridge capacity is 2 ml, which, according to my ability is really good for this device.

From the top of the camera, you can see the slot in the cartridge and inside you can see the magnets. The cartridges are perfectly in place, the magnet is excellent. The top of the device is done in a way that he can see the amount of liquid remaining in the letter of the cartridge are very good. In addition to the camera, you can see the air flow of the two holes, one on each side. On one side of the device you can see c USB port to charge. This unit has a capacity of 700 mAh which is actually a good battery capacity of small appliances. 1A load devices support this so that you will be able to charge the battery very quickly.

If the herbva pro caused the battery indicator on the one hand, it was very good in my opinion. Alum and he produced three colors:

– Green:> 60%
– The color blue: 60% – 30%
– Red: <30%

In this device, you can see the shutter button and you can switch off the machine by pressing 5 times on the shutter button, you must do the same to turn it on. trigger buttons are a bit clicky and it works well. The device also has an interesting switch is, which is very good because you can choose which one to use. Activated switch units worked well, but I prefer to use the fire button here. the device operates in a mode output and maximum power of 20W.

A protection device:

– Overload protection
– Protection against overheating
– Cut in 8 seconds
– Short-circuit protection

How do these devices work and my thoughs:

So my friend arteries also built the device, camera quality is excellent and is made of zinc alloy. I like the design of this device and the device is very good in the hand. With this device, you receive a lanyard that many would like and also with this device, you receive two cartridges with different coils in Nice.
Funnel convenient to use. You can fill the cartridge with ease and without any problems with the gorillas bottle. 2 ml cartridge capacity is excellent capacity for small devices. One can choose between two coils, one coil has a resistance of 1 ohm resistance and other 1.4ohm. This device has a shutter button that can be used and can use the pull switch is activated, which is very good. the battery has a capacity of 700 mAh more than good for small devices and also can charge the battery very quickly as a 1A load bearing.
Device loose a little air flow, air flow MTL do not pull tight, loose mtl interesting and I want a better flow of air tight. taste good, I am satisfied with the taste here, was also shot in the throat. shutter button is active in the plant and pull swith is fine and had no problems here, but I want to use the shutter button to mtl air flow coward. I like the battery indicator because I know how much battery is left. The output devices work directly someone will like and do and this device works up to 20 W when the battery is fully charged. I like what they do on top of the machine, because I could see the liquid in the cartridge is a very good mail.

Therefore, the design of this device is very good, the build quality is very good and I like almost everything here, so I recommend this unit if you like mtl loose relx vape



– Drawing tight




– I love design

– Good build quality

– Easy to use voice

– It is always good in hand

– easy to fill

– 2 ml capacity

– You can see eLiquid

– Two cartridges in the package

– Drawing switch is activated

– fire button

– The battery indicator

– c Usb

– The good taste

– 700mAh

– longe



Thank you gifts sky

You can be purchased here: relx device



Leave a Reply

Your email address will not be published. Required fields are marked *